Matsuura MC 510 VG:
Thanks to its features as rigidity, accuracy and ease of operation, the
MC-510-VG offers good levels of productivity. Thanks
to its integrally configured automatic pallet changer it is cost effective and efficient. The bed and column
castings incorporate heavy ribbing for maximum rigidity. Rectangular section column guideways provides support for the head stock.
Depending on the specific machining requirements, both the MC-510-VG and
RA-IG can be configured with a high speed motor which extends the speed
range to 15,000 rpm.
For heavier duty machining applications such as when machining cast
steel or forgings for the automotive sector the standard 10/74 hp
motor offers a low end torque capability of 35 lb-ft while still
offering a wide speed range of 60 - 8000 rpm.
When the additional benefits of higher speed machining are needed,
such as when machining thin walls and small cavities or when superior
surface finishes are required, then Matsuura's high speed spindle
retains a useful low end torque of 9.7 lb-ft.
Visit Matsuura's website to find out more.
|
Matsuura
MC-510-VG
Specification:
MC-510-VG has a shuttle type 2 pallet changer with pallet change time
on only 9 seconds
and
clamping force of 3525 lbf.
Movement and ranges:
X-axis travel : 20"
Y-axis travel : 14.1"
Z-axis travel : 18.1"
Table
Working surface: 14.9" - 24.9"
Max load on table : 880 lbs
T slot : 11/16" X 3 X 5
Feedrate:
Rapid traverse rate :(X, Y, Z) 1181/ 1181/ 945 in/min
Feedrate : 0.1 -393.7 in/min
Jog feedrate : 0-157 in/min
Accuracy:
Positioning accuracy(x/y): +/- 0.0002" /full stroke
Positioning accuracy (z): +/- 0.00023" /full stroke
Repeatability (x/y/z): +/- 0.00004" /full stroke
|
Motors:
Spindle drive motor: AC10hp (30 min rating)
Feed motors:
X/axis : AC 1.75 hp (at 1500-1)
Y/axis : AC 1.75 hp (at 1500-1)
Z/axis : AC 3.9 hp (at 1500-1)
Coolant Pump Motor: 0.54 hp
Lubrication pump motor : 0.027 hp
Power Supply:
Electrical Power Supply : AC200/220V +/- 10%
Compressed Air Supply: 0.54-0.93 Mpa
Volume of compressed air: 132 galls/min
Ditto - 1500min - 1 Optional : 172 galls/min
Cnc Machine Size:
Cnc Machine height: 107.3"
Mass of machine (w/o pallet and base) : 8488 lbs
Mass of machine/30 tools : 8818 lbs
Machine color: white/red
|
|
|
